Single Boiler Espresso Machines
Best Sellers
FAQs
A single boiler espresso machine heats water in one boiler. On typical single boiler, dual-use models, that boiler supplies both brewing water and steam for milk frothing. You switch between brewing and steaming modes because each task requires a different temperature.
Typical single boiler, dual-use machines handle these tasks separately. Brew your espresso, switch to steam mode, and wait for the machine to indicate it is ready before frothing milk. Before brewing another shot, follow your machine’s instructions for returning to brewing temperature.
A PID controller uses temperature feedback to regulate the boiler’s heater. Some machines also let you adjust the temperature through a display. Machines with traditional thermostats cycle the heater on and off within a preset temperature range, typically without a user-adjustable digital setting.
Choose an espresso-capable burr grinder with fine grind adjustments, especially when using a non-pressurized filter basket. Pressurized baskets may accommodate pre-ground coffee, depending on the machine. Check your basket type and machine manual before choosing your grinding setup.
Rinse the portafilter and basket after use, empty the drip tray, and wipe and purge the steam wand after frothing milk. Follow the manufacturer’s schedule for deeper cleaning and descaling. Backflush only if your machine supports it, using the cleaning products and procedure specified in its manual.






